Metal Bondage

The full device: a neck trap and two wrist traps locked onto one long bar of steel. Stocks your partner wears. The Steel Yoke is the most complete set in the Kink Store device bondage system. A 35 in. steel bar carries a Steel Neck Trap at its center and a Steel Trap at each end, every corner held by black cast iron crossover clamps. Once it's locked, head and hands move as one, held in the classic pillory pose without a wall or frame. It's the look of BDSM metal stocks, built from the same pipe and fittings used on Kink.com's Device Bondage sets. How to Use It Lock your partner in for a standing or kneeling display, wrists level with the shoulders and neck framed in steel. Lead them around the room by the bar. Clamp the bar to a frame for a fixed stocks position. Every trap comes apart, so the yoke can also become a spreader, single traps, or something new. PRO TIP: Fit the wrists before the neck, keep the neck opening loose, and never let the yoke's weight hang from the neck. Help your partner kneel and stand, and keep scenes short. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Neck trap and two wrist traps on a 35 in. steel bar Twelve gloss black cast iron crossover clamps with hex set screws Free-standing and portable, no frame required Foam pipe wrap and hex key included Build Out the Device Add the Steel Trap Spreader for the ankles, a single Steel Trap for an extra limb, or the Device Bondage Accessory Set to change lengths and add tie points. Steel bondage pipe and crossover connectors are sold separately. Compare every set in the device bondage collection or browse all metal bondage gear. Product Specifications Material: Steel pipe; cast iron fittingsFinish: Raw steel with de-burred, polished end cuts; gloss black fittingsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 24 lbIncludes: 6 x 7 in. steel pipe, 3 x 14 in. steel pipe, 1 x 35 in. steel pipe, 12 x crossover connector, 1 x hex key wrench, 1 x foam pipe wrapNote: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

Read more less

The Steel Bondage Tie Point is forged with rosette welds, a process leagues ahead of the typical welding used for tie points; this piece is built to withstand the most demanding scenes. Any flat drillable surface is a candidate for this tie point, whether it’s anchored to the floor, wall, ceiling, or even your bed, this versatile beast ensures you can get creative without compromise. The oversized 2-inch O-ring invites endless possibilities, accommodating multiple passes of rope or chains. Handcrafted in San Francisco by our skilled machinist, this tie point is more than just hardware; it’s a functional piece of art ready to hold your imagination, and your partner, in place. With an easy installation process, the only thing standing between you and your next restraint scene is deciding where to mount it. Step into the shadows of your dungeon fantasies with this powerhouse tie point, engineered for strength and dominance. Features: Super sturdy rosette welds Wide 2” O-ring Classic Kink.com Dungeon aesthetic Designed for any drillable flat surface Comes in single or four packs Materials: Steel Weight: 8.1oz (231g) Dimensions: Mounting plate 3” (7.6cm) wide x 3” (7.6cm) high x 0.13” deep, O-ring opening 2” (5.1cm) in diameter and 0.31” (0.78cm) thick

Read more less

Four bars of raw steel close around a wrist or ankle and hold it exactly where you put it. This is where device bondage starts. The Steel Trap is the simplest device in the Kink Store device bondage system and the one every other set is built from. Four 7 in. steel pipes cross in a square, locked at each corner by a black cast iron crossover clamp. Slide the bars in or out to size the opening, tighten the set screws, and a cuff becomes a fixture. It's the same pipe-and-fitting construction seen on Kink.com's Device Bondage sets, scaled down to one limb. How to Use It Close a trap around one wrist for a heavy, unmistakable cuff that can't be slipped. Lock one around an ankle and bolt it into a larger frame to pin a foot in place. Buy two and you have the start of a spreader, buy three and you're halfway to a yoke. Every trap uses the same pipe and fittings as the rest of the collection, so nothing you buy now is wasted later. PRO TIP: Size the opening with one finger's space between steel and skin, then wrap the bars that touch skin with the included pipe wrap. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Square steel trap made from four raw steel 7 in. pipes Four gloss black cast iron crossover clamps with hex set screws Adjustable opening for wrists or ankles Foam pipe wrap and hex key included Build Out the Device Join two traps with a long bar in the Steel Trap Spreader, scale up to the neck with the Steel Neck Trap, lock neck and wrists together in the Steel Yoke, or rebuild any of them with the Device Bondage Accessory Set. Need more steel? Buy steel bondage pipe by the length and extra crossover connectors. Compare every set in the device bondage collection or browse all metal bondage gear. Product Specifications Material: Steel pipe; cast iron fittingsFinish: Raw steel with de-burred, polished end cuts; gloss black fittingsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 6.4 lbIncludes: 4 x 7 in. steel pipe, 4 x crossover connector, 1 x hex key wrench, 1 x foam pipe wrapNote: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

Read more less

Seize the night with the Vesper Bangle Handcuffs. These highly polished stainless steel cuffs are as strict as they are elegant in both style and function. Bondage Jewelry for a Night Out, or In... At first glance, they're simply striking bangles: mirror-polished stainless steel, weighted for a satisfying drape on the wrist, substantial enough to catch the light across a room. But when the two bangles come together, secured by a gleaming brass padlock, the Vesper Cuffs become something else entirely. Strict and Elegant Cuffs with a Jewelry Cut Worn like bracelets, these heavy cuffs are a constant reminder of the possibilities at hand. When locked together, the functinal design of these cuffs forces the wearer's forearms into unyielding, parallel alignment for fully hands-on bondage play. Two Brass Bondage Padlocks Included KINK's Bondage Padlocks fit perfectly with the Vesper Cuffs. All KINK Bondage Padlocks are keyed alike so you never have to worry about mixing up keys. We ship two padlocks with SIX keys (all keyed alike) so the cuffs can be worn as fashion or function. Size Chart Available in three sizes for a precise, comfortable fit. Inside Dimensions of the Cuffs In the table below, the oval shaped opening is measured. The 'Length' is the diameter across the long axis of the oval. 'Width' is the diameter across the short axis of the oval. 'Opening Circumference' is the circumference of the cuff's opening. Your wrist circimference should measure slightly less than the 'Opening Cirfumference'. Size Length Width Opening Circumference Small 2 1/8" (54 mm) 1 5/8" (42.5 mm) 6" (152.5 mm) Medium 2 1/4" (58 mm) 1 15/16" (50 mm) 6 5/8" (168 mm) Large 2 7/16" (62 mm) 1 15/16" (50 mm) 7" (178 mm) Outside Dimensions (Overall Size) Size Length Width Weight Small 3 5/8" (93 mm) 2 3/16" (56 mm) 11.5 oz Medium 3 3/4" (95 mm) 2 5/16" (60 mm) 10.8 oz Large 3 15/16" (101 mm) 2 7/16" (62 mm) 12.7 oz All cuffs are made of stainless steel bands that measure 3/4" wide and 1/4" thick. All dimensions +/- 3/32" (2 mm). Not sure which size to choose? Wrap a soft measuring tape (or a strip of paper) around your wrist just below the wrist bone and compare to the circumferences above.

Read more less

Two Steel Traps, one long bar, and no way to close the distance. A spreader bar with no give at all. The Steel Trap Spreader puts a steel trap at each end of a 28.5 in. bar of raw steel pipe. Each trap is three 7 in. bars plus the spreader bar itself, locked square by black cast iron crossover clamps, so the whole device is one rigid piece once the set screws are tight. Unlike a strap-and-buckle spreader bar, there's nothing to stretch, slip or twist. How to Use It Lock it around the ankles to keep legs open while your partner stands, kneels or lies back. Move it to the wrists for arms held wide. Clamp the bar to a larger frame and the spread becomes a fixed position. Want a longer spread? Swap in a 35 in. bar from the Accessory Set. PRO TIP: Size each trap with a finger's space around the ankle, wrap the bars that touch skin, and support your partner when they kneel or stand in a spread. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Two steel traps joined by a 28.5 in. steel spreader bar Eight gloss black cast iron crossover clamps with hex set screws Works on ankles or wrists Foam pipe wrap and hex key included Build Out the Device Lock the neck and wrists in the Steel Yoke, add a single Steel Trap or the Steel Neck Trap, or change bar lengths with the Device Bondage Accessory Set. Buy steel bondage pipe by the length and more crossover connectors to build bigger. Compare every set in the device bondage collection or browse all metal bondage gear. Product Specifications Material: Steel pipe; cast iron fittingsFinish: Raw steel with de-burred, polished end cuts; gloss black fittingsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 14.5 lbIncludes: 6 x 7 in. steel pipe, 1 x 28.5 in. steel pipe, 8 x crossover connector, 1 x hex key wrench, 1 x foam pipe wrapNote: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

Read more less

More steel, more joints, more ways to build. Everything you need to take your devices apart and put them back together as something new. The Device Bondage Accessory Set is the workshop drawer of the Kink Store device bondage system. It adds steel pipe in four lengths, from short 3 in. stubs to a full 35 in. bar, plus crossover clamps and Short T fittings for new junctions. Use it to lengthen a spreader, add tie points to a yoke, or build a device of your own. As Kink.com's Device Bondage puts it, no two setups are ever the same. How to Use It Swap the 35 in. bar into a Steel Trap Spreader for a wider spread. Add the 28.5 in. bar and a pair of crossovers to join two traps at a new angle. Branch the 3 in. stubs off a bar with the Short T fittings for handles or tie-off points for rope and chain. The 14 in. pipe extends a neck trap or makes a new crossbar. PRO TIP: Dry-fit a new build before anyone is in it, tighten every set screw, then give each joint a firm tug. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Five raw steel pipes in four lengths Two crossover connectors and two Short T connectors Fits every set in the 1 in. device bondage system Foam pipe wrap and hex key included Build Out the Device Start with the Steel Trap, the Steel Neck Trap, the Steel Trap Spreader or the full Steel Yoke. Buy single lengths of steel bondage pipe, extra crossover connectors and Short T connectors as your builds grow. Compare every set in the device bondage collection or browse all metal bondage gear. Product Specifications Material: Steel pipe; cast iron fittingsFinish: Raw steel with de-burred, polished end cuts; gloss black fittingsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 13.5 lbIncludes: 2 x 3 in. steel pipe, 1 x 14 in. steel pipe, 1 x 28.5 in. steel pipe, 1 x 35 in. steel pipe, 2 x crossover connector, 2 x Short T connector, 1 x hex key wrench, 1 x foam pipe wrapNote: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

Read more less

Whether you're into role-playing cops and robbers or reveling in hard-core restraint, these heavy-duty handcuffs show you mean business. Sturdy solid metal construction and a dependable locking mechanism let you create realistic scenarios. Shackles are adjustable so both small- and big-boned "prisoners" can't escape, and the anti-cinch feature ensures that the cuffs won't tighten down unintentionally. Note: No quick-release button. Pro Tip: Avoid cinching down too tightly and overly straining against the cuffs to reduce the risk of nerve damage. Realistic police-style cuffs for authentic look and feel For role play, bedroom play, bondage Solid metal Two cuff keys included Anti-cinch feature Protective zippered pouch included Material: Metal Weight: 10.9 oz (310g) Dimensions: Space between cuffs 2" (5.1cm), cuff max closed size 2.75" (7cm) wide, minimum closed size 1.75" (4.4cm) wide, overall length 9" (22.9cm)

Read more less

Your mind will race thinking of all the sexy, creative things you can do with this industrial stainless steel chain. Use as a crotch restriction or with wrist and ankle cuffs to achieve different positions. You can also use them to create overhead restraints or as a lead or tether to keep a submissive under control.• Choose the custom length of your chain below• For all levels of play• Links have a 1/4" opening for hooks, snaps, rope, or other attachmentsMaterial: Stainless Steel 1ftWeight: 3.1 oz (88g)Dimensions: 1ft (30.45cm) Length. Links are 1.25” (3.2cm) long and 1/2“ (1.3cm) wide; 1/4" (6mm) opening for attachments; working load limit is 331 lbs (150kg) 2ftWeight: 6.2 oz (176g)Dimensions: 2ft (60.9cm) Length. Links are 1.25” (3.2cm) long and 1/2“ (1.3cm) wide; 1/4" (6mm) opening for attachments; working load limit is 331 lbs (150kg) 3ftWeight: 9.3 oz (264g)Dimensions: 3ft (91.44cm) Length. Links are 1.25” (3.2cm) long and 1/2“ (1.3cm) wide; 1/4" (6mm) opening for attachments; working load limit is 331 lbs (150kg) 5ftWeight: 1 lbs (440g) Dimensions: 5ft (152.4cm) length. Links are 1.25” (3.2cm) long and 1/2“ (1.3cm) wide; 1/4" (6mm) opening for attachments; working load limit is 331 lbs (150kg) 10ftWeight: 1.94lbs (880g)Dimensions: 10ft (304.8cm) length. Links are 1.25” (3.2cm) long and 1/2“ (1.3cm) wide; 1/4" (6mm) opening for attachments; working load limit is 331 lbs (150kg) 15ftWeight: 2.9lbs (1320g)Dimensions: 15ft (457.2cm) Long. Links are 1.25” (3.2cm) long and 1/2“ (1.3cm) wide; 1/4" (6mm) opening for attachments; working load limit is 331 lbs (150kg)

Read more less

Keyed-alike bondage padlocks fit Kink Store leather restraints and chains for a secure experience! Features • All padlocks are keyed alike w/ 2 keys per lock• Dimensions: 1.25" wide x 1" body height x 1.94" overall height• Shaft Diameter: 0.21"• Weight: 1.7 oz. Bondage cuffs and chain are not included

Read more less

Your mind will race thinking of all the sexy, creative things you can do with this smooth, coated metal chain. Use as a crotch restriction or with wrist and ankle cuffs to achieve different positions. It can also be used as a lead or tether to keep a submissive under control.• Cut in custom lengths in increments of 1 meter long• For all levels of play• Links have 1/4" opening for hooks, snaps, rope, or other attachments 2ftMaterial: Coated metalWeight: Approx. 6.8 oz (194.6g)Dimensions: 2" (61 cm) Long. Links are 1" (2.5cm) long and 5/8" (1.6cm) wide and have a 1/4" (6mm) opening for attachments; working load limit is 441 lbs (200kg); maximum breaking strength is 882 lbs (400kg) 3ftMaterial: Coated metalWeight: Approx. 10.3 oz (292g)Dimensions: 3" (30.5cm) Long, links are 1" (2.5cm) long and 5/8" (1.6cm) wide and have a 1/4" (6mm) opening for attachments; working load limit is 441 lbs (200kg); maximum breaking strength is 882 lbs (400kg) 5ftMaterial: Coated metalWeight: Approx. 17 oz (486.5g)Dimensions: 5" (152.4 cm) long. Links are 1" (2.5cm) long and 5/8" (1.6cm) wide and have a 1/4" (6mm) opening for attachments; working load limit is 441 lbs (200kg); maximum breaking strength is 882 lbs (400kg) 10ftMaterial: Coated metalWeight: Approx. 34 oz (973g)Dimensions: 10" (304.8 cm) long. Links are 1" (2.5cm) long and 5/8" (1.6cm) wide and have a 1/4" (6mm) opening for attachments; working load limit is 441 lbs (200kg); maximum breaking strength is 882 lbs (400kg) 15ftMaterial: Coated metalWeight: Approx. 51.5 oz (1459.5g)Dimensions: 15" (457 cm) long. Links are 1" (2.5cm) long and 5/8" (1.6cm) wide and have a 1/4" (6mm) opening for attachments; working load limit is 441 lbs (200kg); maximum breaking strength is 882 lbs (400kg)

Read more less

The raw material of device bondage: raw steel pipe, cut to length and ready to lock into place. Every set in the Kink Store device bondage system starts here. Our steel bondage pipe is cut to five lengths, with every end cut de-burred and polished, and sized to the 1 in. cast iron fittings used across the collection. The steel itself is left raw. Expect minor defects and imperfections, and expect it to develop a patina, or even rust, over time. That is part of the character of device bondage. Buy it to extend a set you already own, replace a bar, or design a device that doesn't exist yet. Choose Your Length 3 in.: stubs, handles and short tie points off a Short T. 7 in.: the bar that forms wrist and ankle traps. 14 in.: neck traps, crossbars and short spans. 28.5 in.: the spreader bar length. 35 in.: the yoke bar, and the longest span for wide spreads and frames. PRO TIP: Plan your build before you order, counting one crossover for every place two pipes meet. Wrap any bar that touches skin with foam pipe wrap. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Raw steel pipe in 3, 7, 14, 28.5 and 35 in. lengths De-burred, polished end cuts 1 in. nominal Schedule 40, to fit the 1 in. fittings in this collection The same pipe used in every Kink Store device bondage set Sold individually, fittings sold separately Put It to Work Lock pipes together with crossover connectors, branch them with Short T connectors, and finish bars with foam pipe wrap. Or start with a ready-made set: the Steel Trap, Steel Neck Trap, Steel Trap Spreader, Steel Yoke or Accessory Set. Compare them all in the device bondage collection, or browse all metal bondage gear. Product Specifications Material: SteelFinish: Raw steel with de-burred, polished end cutsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 3 in. 6.5 oz; 7 in. 15 oz; 14 in. 28.3 oz; 28.5 in. 60 oz; 35 in. 72 ozIncludes: 1 steel pipe in the length selected (fittings sold separately)Note: Minor defects, patina and rust are normal for raw steel.

Read more less

The Steel Trap, scaled up to frame the neck. Four long bars of raw steel turn a collar into a structure. The Steel Neck Trap takes the same square construction as the Steel Trap and builds it from four 14 in. steel pipes, giving a wider frame that sits around the neck like a pillory. Black cast iron crossover clamps hold each corner, and the longer bars leave room to grip, to bolt into a frame, or to carry a pair of wrist traps on either side. It's bondage in steel at its most theatrical, and the centerpiece of the Steel Yoke. How to Use It Close it around the neck as a heavy steel collar your partner can feel every time they move. Add two Steel Traps to the long bars and you have a free-standing pillory for neck and wrists. Mount it on an upright with crossover clamps for a standing position held in steel. PRO TIP: Set the opening so the bars rest around the neck, never against the throat, and never take weight on the neck. Keep scenes short and stay in arm's reach. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Square steel neck trap made from four raw steel 14 in. pipes Four gloss black cast iron crossover clamps with hex set screws Adjustable opening, with long bars for gripping and mounting Foam pipe wrap and hex key included Build Out the Device Add wrist traps and a long bar to make the full Steel Yoke, start smaller with the single-limb Steel Trap, spread the ankles with the Steel Trap Spreader, and reconfigure anything with the Device Bondage Accessory Set. Extra steel bondage pipe and crossover connectors are sold separately. See every set in the device bondage collection or browse all metal bondage gear. Product Specifications Material: Steel pipe; cast iron fittingsFinish: Raw steel with de-burred, polished end cuts; gloss black fittingsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 9.7 lbIncludes: 4 x 14 in. steel pipe, 4 x crossover connector, 1 x hex key wrench, 1 x foam pipe wrapNote: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

Read more less

Double snap hooks are a basic, yet incredibly useful piece of equipment. Compact, lightweight, and easy to transport, these little snap hooks create quick, easy, and removable attachment points. Use in any configuration to attach your favorite BDSM accessories to chains, rope, clamps, and weights. Snap wrist and ankle cuffs together or to collars and waist belts. Really, the possibilities are endless. These helpful snap hooks will help you create the scene of your dreams! Product Specifications Material: Stainless steelWeight: Each hook is 1.1 oz (31g)Dimensions: 3" (7.6cm) long; hook opening is 1/2” (1.3cm) wide

Read more less

The Ice Lock by Kink is the ultimate item in timed restraints. Take the decision of how long to be restrained out of your hands. To fill, place a finger over the small hole in the side and fill the barrel with water. Insert the pin piece and put it in the freezer (small side hole facing up). Once frozen the two pieces will not disconnect until the ice has thawed enough, keeping you or your partner right where they’re wanted for an unknown amount of time. When mostly filled the ice lock will stay locked for upwards of three hours.Pro Tip: Experiment with how much water you use, less water will yield a shorter thaw time.Safety Note: Do not fill to the top, water expands when frozen and can damage the lock. Varying length of thaw time Beautiful polished chrome construction Sturdy Contact points Easy to Clean Material: Stainless steelWeight: 10.2oz (289g)Dimensions: 6” (15.2 cm) long x 2” (5 cm) wideDimensions of contact points: 1 ½” (3.8 cm) Diameter

Read more less

Join three pipes at a single corner to build cubes, cages and box frames that stand square and solid on their own. Box frames start at the corners, and the 3 Way Elbow Pipe Connector is made for exactly that spot. Three pipes seat into three sockets set at right angles to each other, locking a horizontal, a vertical and a depth rail into one rigid junction. What You Can Build Eight of these and twelve lengths of pipe make a cube you can cuff a partner inside or close up into a cage. Four along the top of a rectangle create a freestanding frame with overhead restraint points. Use them along the base to keep a frame square without fixing anything to the floor. PRO TIP: Dry-fit the frame before tightening, then work around the corners tightening each set screw so the structure pulls square. Never leave a restrained partner alone inside an enclosed frame. Features Three sockets at 90 degrees for true box corners Hex set screws lock the pipes in place Shiny black cast iron, straight from the Kink.com set look Offered for 1 in. and 1.5 in. nominal pipe Finish the Frame Add adjustable crossover pipe clamps for movable bars, tie in mid-rail supports with a pipe tee, fix the legs with a flat base flange or a railing post base, and mount a padded board using a single swivel socket. Explore metal bondage essentials. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 17 ozWeight (1.5 in.): 33.3 ozDimensions (1 in.): 2.75" x 2.75" x 2.75"Dimensions (1.5 in.): 3.75" x 3.75" x 3.75"Includes: 1 fitting (pipe sold separately)

Read more less

A two-screw post base with an oval plate, made for load-bearing uprights that take pulling, leaning and struggle. Posts that take a beating need a stronger footing, and the Railing Base Flange delivers it. Its tall socket grips the pipe with two set screws, and the oval plate fixes down through two bolt holes, so the upright holds firm against a partner pulling on their cuffs. Ideal For Anchor the uprights of a standing restraint frame where wrists will be cuffed high. Build a sturdy post for a bend-over rail or a whipping station. Bolt a pair to a heavy platform for a portable frame that stays rigid while your partner squirms. PRO TIP: Bolt into solid structure with anchors sized for the plate holes, and line the holes up with the direction of pull. Agree on a safeword and a quick release plan before the first cuff goes on. Features Two hex set screws for a firm grip on the post Oval plate with two fixing holes High-gloss black cast iron, the hardware of Kink.com shoots Built for 1 in. and 1.5 in. nominal pipe Build a Frame That Holds Raise your posts and connect them with a pipe crossover connector, frame the top corners using 3 way elbow fittings, brace mid-span with a T pipe fitting, use the lighter round base flange for positioning-only legs, and fasten boards with a bolt-on swivel socket. Shop metal bondage. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 20.8 ozWeight (1.5 in.): 35.9 ozDimensions (1 in.): 4.9" x 2.4" x 3.9"Dimensions (1.5 in.): 5.9" x 3.1" x 4.75"Includes: 1 fitting (pipe sold separately)

Read more less

Plant a pipe upright on the floor, wall or platform with a round four-hole flange that keeps your frame in position. The Base Flange gives a pipe something solid to stand on. Seat the pipe in the socket, tighten the set screw, then fix the round plate down through its four holes. Uprights stay put, corners stay square, and your build stops wandering across the floor. Best Uses Screw a row into a plywood platform to create a freestanding base you can move between rooms. Fix one to a wall to hold a horizontal bar for displaying rope, cuffs and floggers. For posts that a partner will pull hard against, step up to the Railing Base Flange, which grips the pipe with two set screws for added side-load stability. PRO TIP: Choose fixings to suit the surface, such as wood screws for a platform and proper anchors for drywall, and fix into studs whenever you can. Device bondage is slower to release, so stay in close contact with your partner. Features Four recessed fixing holes for a flush mount Set screw locks the pipe into the socket Black gloss cast iron as featured in Kink.com productions Fits 1 in. and 1.5 in. nominal pipe Build Up From the Base Rise from the floor into a full frame: add crossover clamps for movable crossbars, close the top with a 3 way elbow corner, branch out with a short tee connector, choose the railing base flange for heavy-use posts, and mount panels using a swivel lug fitting. Find more in the metal bondage range. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 13.6 ozWeight (1.5 in.): 26 ozDimensions (1 in.): 3.5" x 3.5" x 2"Dimensions (1.5 in.): 4.5" x 4.5" x 2.5"Includes: 1 fitting (pipe sold separately)

Read more less

Lock a crossbar onto an upright at any height and build movable restraint points into your pipe bondage frame. The 90 Degree Crossover is the fitting that makes pipe bondage adjustable. It clamps one pipe across another at a right angle with both pipes running straight through, so you can park a crossbar exactly where a body needs it and move it again whenever the scene changes. Built for Adjustable Restraint Points Set a horizontal bar across two uprights at wrist height for a standing spread. Drop it to knee level to hold ankles wide. Stack several on one post to create a ladder of tie-off points for cuffs, rope and chain. Loosen the set screws, slide, retighten, and the frame reshapes around your play. PRO TIP: Tighten each set screw firmly before anyone puts weight on a bar, then check in with your partner often. Device bondage takes longer to exit, so keep a hex key within arm's reach. Features Pipes pass through uninterrupted, no cutting or joining required Hex set screws grip tight and release fast Gloss black coated cast iron, the same hardware seen on Kink.com shoots Made for 1 in. and 1.5 in. nominal pipe Complete Your Pipe Bondage Frame Brace the corners with a 3 way elbow corner fitting, branch off mid-bar with a short T connector, anchor uprights using a four-hole base flange or the sturdier two-screw railing base flange, and mount boards with the swivel socket member. Browse more metal bondage hardware. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 10.5 ozWeight (1.5 in.): 18.7 ozDimensions (1 in.): 1.5" x 3.25" x 1.5"Dimensions (1.5 in.): 2.25" x 4.5" x 2.25"Includes: 1 fitting (pipe sold separately)

Read more less

Clamp it onto a pipe and the flat lug becomes a solid bolt-on point for benches, kneelers and padded platforms. The Male Single Swivel Socket Member is the bridge between pipe and platform. Clamp the ring around a tube, then bolt a padded board, kneeling pad or wooden panel to its flat lug. Your frame gains a place to lie back, kneel or bend over, fixed right where you want it. Turn Your Frame Into Furniture Run two or more along a pair of rails to mount a bench top. Fix a padded plank low on the uprights for a kneeling station. Paired with a matching female swivel socket member, it also forms a hinge for joints you can tilt to a new angle. PRO TIP: Use bolts and lock nuts rated for the load, and test a mounted board with your own weight before a partner climbs on. Recheck the hardware between sessions. Features Single lug with a fixing hole for bolting on flat panels Hex set screw locks the ring to the pipe Gloss black finish that matches the rigs on Kink.com Sized for 1 in. and 1.5 in. nominal pipe Pair It With These Pipe Fittings Hold the rails that carry your platform with a crossover pipe clamp, square off the base with 3 way corner connectors, add legs using a T-shaped pipe connector, and fix the frame down with a round floor flange or a railing flange for load-bearing posts. Shop the full metal bondage collection. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 8.7 ozWeight (1.5 in.): 12.3 ozDimensions (1 in.): 1.75" x 1.5" x 3.25"Dimensions (1.5 in.): 2.4" x 1.75" x 4.25"Includes: 1 fitting (pipe sold separately)

Read more less

Branch a new pipe off the middle of a run at a clean right angle for stocks, center posts and low-set tie points. When a frame needs to grow sideways, the Short T Pipe Connector does the work. One pipe passes straight through the top while a second pipe seats into the base at a right angle, giving you a solid T-junction anywhere along a run. Where It Shines Drop a center post under a long crossbar to stop it from flexing. Build the skeleton of a set of stocks with branches for neck and wrist boards. Add a short stub off an upright for a low tie point at ankle height. It turns a simple rectangle into real bondage furniture. PRO TIP: Push the branch pipe fully into its socket before tightening, then give the joint a firm tug to test it. Keep the scene interactive and check circulation in hands and feet regularly. Features Through-pipe and branch-pipe sockets set at 90 degrees Hex set screws on both sockets Glossy cast iron with the look of Kink.com device sets Comes in 1 in. and 1.5 in. nominal pipe sizes Expand the Build Pair your T joints with a 90 degree crossover clamp for adjustable bars, frame the corners using a 3 way elbow, anchor posts to the floor with a pipe base flange or a heavy-duty railing base flange, and bolt on boards via a male swivel socket. See all metal bondage gear. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 10.4 ozWeight (1.5 in.): 18.7 ozDimensions (1 in.): 3.75" x 2.75" x 2.75"Dimensions (1.5 in.): 4.9" x 2.5" x 2.5"Includes: 1 fitting (pipe sold separately)

Read more less

Ignite your desires with the Gold Eclipse Anchor Shackle by Kink, your ultimate tool for locking down lust. Gleaming with a bold gold finish, this heavy-duty connector is all about creating secure, tantalizing attachment points that invite creativity and control. Want to link chains, add weights, or keep your sub deliciously restrained? The Gold Eclipse Anchor Shackle is built for whatever wild setup you have in mind. This compact yet commanding shackle slips easily into your toy bag, ready to make a statement wherever the scene takes you. Its easy screw-pin design ensures smooth transitions from one devious position to the next, letting you focus on pleasure rather than fumbling with gear. Go ahead – let your imagination run wild. With the Gold Eclipse Anchor Shackle, every connection is a chance to explore, entice, and intensify. Perfect size for cuffs and collars Compact size Body-safe materials Product Specifications Material: BrassWeight per Shackle: 0.6oz (17g)Dimensions: Overall 1.5" (3.8cm) long x 1.5" (3.8cm) wide x 0.25" (0.6cm) deep, mouth of shackle is 0.75" (1.9cm) wide

Read more less

Ready to lock down your play? The Gold Eclipse Lock by Kink is more than just a restraint, it's a promise of power, control, and surrender. Snap it shut around wrists, ankles, or collars, and let the metallic click ignite the anticipation. With its pendant-like design, the Gold Eclipse becomes the focal point of whatever you attach it to, adding a bold, stylish touch that demands attention. Whether you are securing one point of restraint or indulging in a full five-shackle fantasy, this set keeps things thrillingly tight. You have the choice: get a single lock to keep things focused or grab a bundle for more delicious possibilities. Each one comes with its own key, giving you complete control over when—and if—the freedom to release is granted. Perfect size for cuffs and collars Compact size Body-safe materials Available in bundle Material: Brass Weight: 0.6oz (18g) Dimensions: overall 1.5" (3.8cm) long x 0.9" (2.3cm) wide x 0.5" (1.3cm) deep, interior of shackle is 0.5" (1.3cm) wide, key is 1.1" (2.8cm) long

Read more less