Steel Neck Trap Device Bondage Collar | Kink Store

Device Bondage Steel Neck Trap

Description

The Steel Trap, scaled up to frame the neck. Four long bars of raw steel turn a collar into a structure.

The Steel Neck Trap takes the same square construction as the Steel Trap and builds it from four 14 in. steel pipes, giving a wider frame that sits around the neck like a pillory. Black cast iron crossover clamps hold each corner, and the longer bars leave room to grip, to bolt into a frame, or to carry a pair of wrist traps on either side. It's bondage in steel at its most theatrical, and the centerpiece of the Steel Yoke.

How to Use It

Close it around the neck as a heavy steel collar your partner can feel every time they move. Add two Steel Traps to the long bars and you have a free-standing pillory for neck and wrists. Mount it on an upright with crossover clamps for a standing position held in steel.

PRO TIP: Set the opening so the bars rest around the neck, never against the throat, and never take weight on the neck. Keep scenes short and stay in arm's reach. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone.

Features

  • Square steel neck trap made from four raw steel 14 in. pipes
  • Four gloss black cast iron crossover clamps with hex set screws
  • Adjustable opening, with long bars for gripping and mounting
  • Foam pipe wrap and hex key included

Build Out the Device

Add wrist traps and a long bar to make the full Steel Yoke, start smaller with the single-limb Steel Trap, spread the ankles with the Steel Trap Spreader, and reconfigure anything with the Device Bondage Accessory Set. Extra steel bondage pipe and crossover connectors are sold separately. See every set in the device bondage collection or browse all metal bondage gear.

Product Specifications

Material: Steel pipe; cast iron fittings
Finish: Raw steel with de-burred, polished end cuts; gloss black fittings
Pipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)
Weight: 9.7 lb
Includes: 4 x 14 in. steel pipe, 4 x crossover connector, 1 x hex key wrench, 1 x foam pipe wrap
Note: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

Product form

The Steel Trap, scaled up to frame the neck. Four long bars of raw steel turn a collar into a... Read more

  • Key Benefits:
    - Rigid steel collar of 14 in. bars
    - Rests around the neck, not on it
    - Builds the Steel Yoke
    - Hex key, no welding
    - KINK guaranteed

$200.00

    Description

    The Steel Trap, scaled up to frame the neck. Four long bars of raw steel turn a collar into a structure.

    The Steel Neck Trap takes the same square construction as the Steel Trap and builds it from four 14 in. steel pipes, giving a wider frame that sits around the neck like a pillory. Black cast iron crossover clamps hold each corner, and the longer bars leave room to grip, to bolt into a frame, or to carry a pair of wrist traps on either side. It's bondage in steel at its most theatrical, and the centerpiece of the Steel Yoke.

    How to Use It

    Close it around the neck as a heavy steel collar your partner can feel every time they move. Add two Steel Traps to the long bars and you have a free-standing pillory for neck and wrists. Mount it on an upright with crossover clamps for a standing position held in steel.

    PRO TIP: Set the opening so the bars rest around the neck, never against the throat, and never take weight on the neck. Keep scenes short and stay in arm's reach. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone.

    Features

    • Square steel neck trap made from four raw steel 14 in. pipes
    • Four gloss black cast iron crossover clamps with hex set screws
    • Adjustable opening, with long bars for gripping and mounting
    • Foam pipe wrap and hex key included

    Build Out the Device

    Add wrist traps and a long bar to make the full Steel Yoke, start smaller with the single-limb Steel Trap, spread the ankles with the Steel Trap Spreader, and reconfigure anything with the Device Bondage Accessory Set. Extra steel bondage pipe and crossover connectors are sold separately. See every set in the device bondage collection or browse all metal bondage gear.

    Product Specifications

    Material: Steel pipe; cast iron fittings
    Finish: Raw steel with de-burred, polished end cuts; gloss black fittings
    Pipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)
    Weight: 9.7 lb
    Includes: 4 x 14 in. steel pipe, 4 x crossover connector, 1 x hex key wrench, 1 x foam pipe wrap
    Note: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

    Recently viewed products

    Login

    Forgot your password?

    Don't have an account yet?
    Create account