Description
Four bars of raw steel close around a wrist or ankle and hold it exactly where you put it. This is where device bondage starts.
The Steel Trap is the simplest device in the Kink Store device bondage system and the one every other set is built from. Four 7 in. steel pipes cross in a square, locked at each corner by a black cast iron crossover clamp. Slide the bars in or out to size the opening, tighten the set screws, and a cuff becomes a fixture. It's the same pipe-and-fitting construction seen on Kink.com's Device Bondage sets, scaled down to one limb.
How to Use It
Close a trap around one wrist for a heavy, unmistakable cuff that can't be slipped. Lock one around an ankle and bolt it into a larger frame to pin a foot in place. Buy two and you have the start of a spreader, buy three and you're halfway to a yoke. Every trap uses the same pipe and fittings as the rest of the collection, so nothing you buy now is wasted later.
PRO TIP: Size the opening with one finger's space between steel and skin, then wrap the bars that touch skin with the included pipe wrap. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone.
Features
- Square steel trap made from four raw steel 7 in. pipes
- Four gloss black cast iron crossover clamps with hex set screws
- Adjustable opening for wrists or ankles
- Foam pipe wrap and hex key included
Build Out the Device
Join two traps with a long bar in the Steel Trap Spreader, scale up to the neck with the Steel Neck Trap, lock neck and wrists together in the Steel Yoke, or rebuild any of them with the Device Bondage Accessory Set. Need more steel? Buy steel bondage pipe by the length and extra crossover connectors. Compare every set in the device bondage collection or browse all metal bondage gear.
Product Specifications
Material: Steel pipe; cast iron fittings
Finish: Raw steel with de-burred, polished end cuts; gloss black fittings
Pipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)
Weight: 6.4 lb
Includes: 4 x 7 in. steel pipe, 4 x crossover connector, 1 x hex key wrench, 1 x foam pipe wrap
Note: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.
