E-Stim Pads, Cables & Accessories

The missing link between your electrodes and control unit. Plug in, dial up, and feel every pulse land exactly right. This 2mm to 3.5mm TENS cable connects E-Stim Systems Control units to any electrode with a TENS-style socket. The cable is 59 inches (1.5m) long, and pairs a single 3.5mm mono jack with two color coded 2mm plugs, so polarity stays correct and setup takes seconds.

Read more less

3.5mm Snap E-Stim Accessory Cable E-Stim cable mono 3.5mm male to 3.5mm female snap connectors, 40" long

Read more less

Replace your old e-stim pads with new ones with this 4-pack of high-quality sticky pads. These self-adhesive sticky electro pads are flexible and curve to the shape of your body. They are made of medical-grade electrode gel which provides a soft feeling against the skin. They also feature a black cloth backing for comfort and durability. These sticky pads can be cleaned easily so you can use them dozens of times. After cleaning and air drying, store them in the included resealable bag so you can prolong the lifespan of your e-stim pads.Accepts a standard 2mm pin connector.• Comes in a set of four• Easy to clean (lukewarm water & air-dry recommended)• Standard size connectors (2mm)Material: PlasticWeight: 0.56 oz Dimensions: L: 1.5” W: 1.5” (each pad)

Read more less

Two cables, one job: bridge your 2mm gear to 3.5mm snap connectors so nothing's left out of the circuit. Built to Bridge the Gap Not every electrode speaks the same language as your power box. This cable translates between them, taking a 2mm female input and stepping it down to a 3.5mm snap connector, so your snap-style electrodes stay in play no matter what output your unit uses. Two E-Stim Accessory Cables Each pack includes two 2mm female to 3.5mm snap connector cables, 7 inches (17.8cm) long, so you can run a two-electrode setup or want a backup on hand. Pro Tip: Check your electrode's connector type before you buy, snap connectors and mono jacks aren't interchangeable without the right adapter. Product Specifications Connector: 2mm Female to 3.5mm Snap Length:7 inches (17.8cm) Quantity: Two cables

Read more less

Replace your old e-stim pads with new ones with this bundle of high-quality sticky pads. Each bundle contains 10 sheets of 4 sticky pads, and two monojack cables. These self-adhesive sticky electro pads are flexible and curve to the shape of your body. They are made of medical-grade electrode gel which provides a soft feeling against the skin. They also feature a black cloth backing for comfort and durability. These sticky pads can be cleaned easily so you can use them dozens of times. After cleaning and air drying, store them in the included resealable bag so you can prolong the lifespan of your e-stim pads.Accepts a standard 2mm pin connector. Cable is 2mm to 3.5mm (or 1/8") mono audio jack.• Comes in a set of ten sheets of four with 2 cable connectors• Easy to clean (lukewarm water & air-dry recommended)• Standard size connectors : 2x2mmMaterial: PlasticWeight: 6.84 oz (194g)Dimensions: L: 1.5” W: 1.5” (each pad)Cable length: 60” (152.4cm)

Read more less

Keep the current flowing from a 2.5mm socket to a 3.5mm plug. Built to Bridge the Gap E-stim gear doesn't always share the same plug size. This cable takes a 2.5mm socket on one end and steps it up to a 3.5mm plug on the other, so your smaller connectors can run off a 3.5mm output without hunting for the right adapter. PRO TIP: Confirm your needed plug/socket sizing before ordering. Product Specifications Connector: 3.5mm Plug to 2.5mm Socket Length: 9 inches (22.9cm) Quantity: 1 cable

Read more less

Retaining clips sized to match your Conductive Rubber Tubing, keeping electrodes secure through your session. Two Clips Sizes for Conductive Silicone Conductive tubing clips come in two sizes so you get the correct fit every time. The 6mm clip is sized for 4mm Conductive Rubber Tubing, while the 8mm clip is sized for 6mm Conductive Rubber Tubing. Select the size that matches the tubing you're using before adding to cart. Not sure which tubing you have, or need to pick some up? Check out our Conductive Silicone Rubber Tube, available in both 4mm and 6mm. Build a Complete Electrode Pair these clips with conductive rubber tubing to create fully custom e-stim or TENS electrodes suited to your own designs. For everything you need in one place, see our Conductive Silicone Kit. Pro Tip: Always double check clip size against your tubing diameter before use. A clip that's too loose won't hold conductive contact, and one that's too tight can damage the tubing over time. Product Specs Material: Plastic and metal contact platingSize options: 6mm (fits 4mm tubing) / 8mm (fits 6mm tubing)

Read more less

Wire your own connection into the circuit, screw it down and let the current flow where you send it. Wire It Your Way This adapter gives you a 3.5mm mono plug on one end and an open 2-pin terminal block on the other. Clamp down bare wire for wiring a connection exactly to spec. Turn the screws, seat the wire, and you're in. PRO TIP: Strip your wire ends clean before clamping, a loose or uneven connection is the most common cause of signal drop. Product Specifications Connector: 3.5mm Male Mono Plug to 2-Pin Terminal Block Casing: Insulated ABS Terminal: Screw-adjustable, 2-pin

Read more less

Stay in full control of the connection with a 3.5mm Female Mono Adaptor, 2-Pin. Wire It Your Way Sometimes you need the socket end, not the plug. This adapter pairs a 3.5mm mono socket with an open 2-pin terminal block, to clamp wire in and give any mono plug somewhere to connect. Turn the screws, seat the wire, and it's ready to receive. PRO TIP: Strip your wire ends clean before clamping, a loose or uneven connection is the most common cause of signal drop. Product Specifications Connector: 3.5mm Female Mono Plug to 2-Pin Terminal Block Casing: Insulated ABS Terminal: Screw-adjustable, 2-pin  

Read more less

Turn a 2.5mm powerbox output into a standard 3.5mm socket, so your favourite e-stim electrodes plug straight in. This 2.5mm male to 3.5mm female mono cable adapts any powerbox with a 2.5mm output so it accepts standard 3.5mm accessory cables. At roughly 9 inches long, it pairs directly with our 2mm to 3.5mm mono jack cable to bring 2mm-pin electrodes to any e-stim powerbox, regardless of brand.

Read more less

Conductive rubber tubing in 4MM and 6MM sizes, the flexible core of any custom e-stim setup. This conductive rubber tubing is the building block behind custom electrosex setups, letting you create your own electrode points wherever you want current to travel. Flexible and easy to work with, it conducts reliably along its full length, so you can wrap it, loop it, or cut it down to the exact size your setup calls for. Available in 4mm and 6mm, so you can match the tubing to the scale of what you're building. Endless Electro Sex Possibilities Sizing is the external diameter, both sizes fit a 2mm monojack cable and can be combined in a single build if your creativity calls for it. Larger size of tubing, the greater the contact point on the skin. Keep in mind this tubing is only one piece of the circuit. To use it with your e-stim power box, you'll also need conductive rubber tubing clips to attach the leads, and a monojack cable to connect to your unit. If you'd rather skip assembling the pieces yourself, our conductive rubber tubing kit bundles one tube with 4 connectors and 4 cables so you're ready to go right out of the box. PRO TIP: This tubing alone won't connect to your e-stim power box, you'll need tubing clips and a monojack cable to complete the circuit. If you're new to building your own electrode setups, KINK's Estim Essentials Kit is the easiest way to get started. Product Specifications Material: High quality conductive silicone rubberExternal Diameter: 4MM, and 6MMLength: 40 inches (1 meter)Conductivity: - 4mm: 70 ohms over 10cm- 6mm: 25 ohms over 10cm

Read more less

Add length to your e-stim setup without losing signal with 3.5mm mono extension cable by KINK. This 3.5mm mono extension cable is a simple male-to-female pass-through cord, giving you extra reach between your powerbox and electrodes without changing the signal. Safe for low-voltage e-stim setups and works with any of our 3.5mm estim mono cables.

Read more less

This 3.5mm mono splitter cable lets you run two e-stim accessories off a single output, so you can wire up multiple electrodes or toys from one power box channel for synchronized play. Note: Splitting a single channel divides the current output between the connected accessories, which may reduce the overall intensity felt at each individual electrode.

Read more less