Bondage Hardware

This skin friendly bondage tape sticks to itself, not to your hair! Use it to create enticing wraps and bondage restraints. The shiny PVC allows your partner to shine through, and can be used to bind, gag, blindfold, or dress the object of your affection. It is easy to use and visually stunning. Wrap your lover up tonight. It is bound to please you both! Measurements: 2 inches in width, 65 feet in length Material: PVC Color: Clear

Read more less

Simple, yet strikingly sexy. These durable, leather straps can be used in so many ways! Rope them through the rings of your favorite BDSM accessories or use them to bound and gag your partner. They feature beautifully polished leather grain on one side and soft suede on the other. They look amazing binding the wrists and ankles. Discreet, lightweight, and easily transported, these will quickly become one of your favorites. • 100% Genuine leather• For all levels of play• Durable leather• Sold as 4-packMaterial: 100% Genuine leatherDimensions: Length 60" (152cm); width 1/2" (1.3cm)

Read more less

Show daddy how much you love being restrained by wearing your heart on your cuffs and collar with this charming set of padlocks, now available in sleek black, playful pink, and classic red. Easy to open and close, these heart-shaped locks will keep a collar and wrist and ankle cuffs securely fastened. Whether you use them for fashion or keeping your sub in line, they will bring some fun into your D/S play. Pro Tip: If you lose the included key, use a standard handcuff key to open. Works for restraining and for fashion Available in black, pink, and red Perfect size for cuffs and collars Small and discreet Sold in a pack of 5, each with its own key Material: Metal Weight: 0.6 oz (17g) each Dimensions: 1.2"(3cm) tall x 1.5" (3.8cm) wide x 0.25” (0.6cm) deep

Read more less

Join three pipes at a single corner to build cubes, cages and box frames that stand square and solid on their own. Box frames start at the corners, and the 3 Way Elbow Pipe Connector is made for exactly that spot. Three pipes seat into three sockets set at right angles to each other, locking a horizontal, a vertical and a depth rail into one rigid junction. What You Can Build Eight of these and twelve lengths of pipe make a cube you can cuff a partner inside or close up into a cage. Four along the top of a rectangle create a freestanding frame with overhead restraint points. Use them along the base to keep a frame square without fixing anything to the floor. PRO TIP: Dry-fit the frame before tightening, then work around the corners tightening each set screw so the structure pulls square. Never leave a restrained partner alone inside an enclosed frame. Features Three sockets at 90 degrees for true box corners Hex set screws lock the pipes in place Shiny black cast iron, straight from the Kink.com set look Offered for 1 in. and 1.5 in. nominal pipe Finish the Frame Add adjustable crossover pipe clamps for movable bars, tie in mid-rail supports with a pipe tee, fix the legs with a flat base flange or a railing post base, and mount a padded board using a single swivel socket. Explore metal bondage essentials. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 17 ozWeight (1.5 in.): 33.3 ozDimensions (1 in.): 2.75" x 2.75" x 2.75"Dimensions (1.5 in.): 3.75" x 3.75" x 3.75"Includes: 1 fitting (pipe sold separately)

Read more less

A two-screw post base with an oval plate, made for load-bearing uprights that take pulling, leaning and struggle. Posts that take a beating need a stronger footing, and the Railing Base Flange delivers it. Its tall socket grips the pipe with two set screws, and the oval plate fixes down through two bolt holes, so the upright holds firm against a partner pulling on their cuffs. Ideal For Anchor the uprights of a standing restraint frame where wrists will be cuffed high. Build a sturdy post for a bend-over rail or a whipping station. Bolt a pair to a heavy platform for a portable frame that stays rigid while your partner squirms. PRO TIP: Bolt into solid structure with anchors sized for the plate holes, and line the holes up with the direction of pull. Agree on a safeword and a quick release plan before the first cuff goes on. Features Two hex set screws for a firm grip on the post Oval plate with two fixing holes High-gloss black cast iron, the hardware of Kink.com shoots Built for 1 in. and 1.5 in. nominal pipe Build a Frame That Holds Raise your posts and connect them with a pipe crossover connector, frame the top corners using 3 way elbow fittings, brace mid-span with a T pipe fitting, use the lighter round base flange for positioning-only legs, and fasten boards with a bolt-on swivel socket. Shop metal bondage. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 20.8 ozWeight (1.5 in.): 35.9 ozDimensions (1 in.): 4.9" x 2.4" x 3.9"Dimensions (1.5 in.): 5.9" x 3.1" x 4.75"Includes: 1 fitting (pipe sold separately)

Read more less

Plant a pipe upright on the floor, wall or platform with a round four-hole flange that keeps your frame in position. The Base Flange gives a pipe something solid to stand on. Seat the pipe in the socket, tighten the set screw, then fix the round plate down through its four holes. Uprights stay put, corners stay square, and your build stops wandering across the floor. Best Uses Screw a row into a plywood platform to create a freestanding base you can move between rooms. Fix one to a wall to hold a horizontal bar for displaying rope, cuffs and floggers. For posts that a partner will pull hard against, step up to the Railing Base Flange, which grips the pipe with two set screws for added side-load stability. PRO TIP: Choose fixings to suit the surface, such as wood screws for a platform and proper anchors for drywall, and fix into studs whenever you can. Device bondage is slower to release, so stay in close contact with your partner. Features Four recessed fixing holes for a flush mount Set screw locks the pipe into the socket Black gloss cast iron as featured in Kink.com productions Fits 1 in. and 1.5 in. nominal pipe Build Up From the Base Rise from the floor into a full frame: add crossover clamps for movable crossbars, close the top with a 3 way elbow corner, branch out with a short tee connector, choose the railing base flange for heavy-use posts, and mount panels using a swivel lug fitting. Find more in the metal bondage range. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 13.6 ozWeight (1.5 in.): 26 ozDimensions (1 in.): 3.5" x 3.5" x 2"Dimensions (1.5 in.): 4.5" x 4.5" x 2.5"Includes: 1 fitting (pipe sold separately)

Read more less

Lock a crossbar onto an upright at any height and build movable restraint points into your pipe bondage frame. The 90 Degree Crossover is the fitting that makes pipe bondage adjustable. It clamps one pipe across another at a right angle with both pipes running straight through, so you can park a crossbar exactly where a body needs it and move it again whenever the scene changes. Built for Adjustable Restraint Points Set a horizontal bar across two uprights at wrist height for a standing spread. Drop it to knee level to hold ankles wide. Stack several on one post to create a ladder of tie-off points for cuffs, rope and chain. Loosen the set screws, slide, retighten, and the frame reshapes around your play. PRO TIP: Tighten each set screw firmly before anyone puts weight on a bar, then check in with your partner often. Device bondage takes longer to exit, so keep a hex key within arm's reach. Features Pipes pass through uninterrupted, no cutting or joining required Hex set screws grip tight and release fast Gloss black coated cast iron, the same hardware seen on Kink.com shoots Made for 1 in. and 1.5 in. nominal pipe Complete Your Pipe Bondage Frame Brace the corners with a 3 way elbow corner fitting, branch off mid-bar with a short T connector, anchor uprights using a four-hole base flange or the sturdier two-screw railing base flange, and mount boards with the swivel socket member. Browse more metal bondage hardware. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 10.5 ozWeight (1.5 in.): 18.7 ozDimensions (1 in.): 1.5" x 3.25" x 1.5"Dimensions (1.5 in.): 2.25" x 4.5" x 2.25"Includes: 1 fitting (pipe sold separately)

Read more less

Clamp it onto a pipe and the flat lug becomes a solid bolt-on point for benches, kneelers and padded platforms. The Male Single Swivel Socket Member is the bridge between pipe and platform. Clamp the ring around a tube, then bolt a padded board, kneeling pad or wooden panel to its flat lug. Your frame gains a place to lie back, kneel or bend over, fixed right where you want it. Turn Your Frame Into Furniture Run two or more along a pair of rails to mount a bench top. Fix a padded plank low on the uprights for a kneeling station. Paired with a matching female swivel socket member, it also forms a hinge for joints you can tilt to a new angle. PRO TIP: Use bolts and lock nuts rated for the load, and test a mounted board with your own weight before a partner climbs on. Recheck the hardware between sessions. Features Single lug with a fixing hole for bolting on flat panels Hex set screw locks the ring to the pipe Gloss black finish that matches the rigs on Kink.com Sized for 1 in. and 1.5 in. nominal pipe Pair It With These Pipe Fittings Hold the rails that carry your platform with a crossover pipe clamp, square off the base with 3 way corner connectors, add legs using a T-shaped pipe connector, and fix the frame down with a round floor flange or a railing flange for load-bearing posts. Shop the full metal bondage collection. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 8.7 ozWeight (1.5 in.): 12.3 ozDimensions (1 in.): 1.75" x 1.5" x 3.25"Dimensions (1.5 in.): 2.4" x 1.75" x 4.25"Includes: 1 fitting (pipe sold separately)

Read more less

Branch a new pipe off the middle of a run at a clean right angle for stocks, center posts and low-set tie points. When a frame needs to grow sideways, the Short T Pipe Connector does the work. One pipe passes straight through the top while a second pipe seats into the base at a right angle, giving you a solid T-junction anywhere along a run. Where It Shines Drop a center post under a long crossbar to stop it from flexing. Build the skeleton of a set of stocks with branches for neck and wrist boards. Add a short stub off an upright for a low tie point at ankle height. It turns a simple rectangle into real bondage furniture. PRO TIP: Push the branch pipe fully into its socket before tightening, then give the joint a firm tug to test it. Keep the scene interactive and check circulation in hands and feet regularly. Features Through-pipe and branch-pipe sockets set at 90 degrees Hex set screws on both sockets Glossy cast iron with the look of Kink.com device sets Comes in 1 in. and 1.5 in. nominal pipe sizes Expand the Build Pair your T joints with a 90 degree crossover clamp for adjustable bars, frame the corners using a 3 way elbow, anchor posts to the floor with a pipe base flange or a heavy-duty railing base flange, and bolt on boards via a male swivel socket. See all metal bondage gear. Product Specifications Material: Cast ironFinish: Gloss black coatingPipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40Weight (1 in.): 10.4 ozWeight (1.5 in.): 18.7 ozDimensions (1 in.): 3.75" x 2.75" x 2.75"Dimensions (1.5 in.): 4.9" x 2.5" x 2.5"Includes: 1 fitting (pipe sold separately)

Read more less

Four bars of raw steel close around a wrist or ankle and hold it exactly where you put it. This is where device bondage starts. The Steel Trap is the simplest device in the Kink Store device bondage system and the one every other set is built from. Four 7 in. steel pipes cross in a square, locked at each corner by a black cast iron crossover clamp. Slide the bars in or out to size the opening, tighten the set screws, and a cuff becomes a fixture. It's the same pipe-and-fitting construction seen on Kink.com's Device Bondage sets, scaled down to one limb. How to Use It Close a trap around one wrist for a heavy, unmistakable cuff that can't be slipped. Lock one around an ankle and bolt it into a larger frame to pin a foot in place. Buy two and you have the start of a spreader, buy three and you're halfway to a yoke. Every trap uses the same pipe and fittings as the rest of the collection, so nothing you buy now is wasted later. PRO TIP: Size the opening with one finger's space between steel and skin, then wrap the bars that touch skin with the included pipe wrap. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Square steel trap made from four raw steel 7 in. pipes Four gloss black cast iron crossover clamps with hex set screws Adjustable opening for wrists or ankles Foam pipe wrap and hex key included Build Out the Device Join two traps with a long bar in the Steel Trap Spreader, scale up to the neck with the Steel Neck Trap, lock neck and wrists together in the Steel Yoke, or rebuild any of them with the Device Bondage Accessory Set. Need more steel? Buy steel bondage pipe by the length and extra crossover connectors. Compare every set in the device bondage collection or browse all metal bondage gear. Product Specifications Material: Steel pipe; cast iron fittingsFinish: Raw steel with de-burred, polished end cuts; gloss black fittingsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 6.4 lbIncludes: 4 x 7 in. steel pipe, 4 x crossover connector, 1 x hex key wrench, 1 x foam pipe wrapNote: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

Read more less

Two Steel Traps, one long bar, and no way to close the distance. A spreader bar with no give at all. The Steel Trap Spreader puts a steel trap at each end of a 28.5 in. bar of raw steel pipe. Each trap is three 7 in. bars plus the spreader bar itself, locked square by black cast iron crossover clamps, so the whole device is one rigid piece once the set screws are tight. Unlike a strap-and-buckle spreader bar, there's nothing to stretch, slip or twist. How to Use It Lock it around the ankles to keep legs open while your partner stands, kneels or lies back. Move it to the wrists for arms held wide. Clamp the bar to a larger frame and the spread becomes a fixed position. Want a longer spread? Swap in a 35 in. bar from the Accessory Set. PRO TIP: Size each trap with a finger's space around the ankle, wrap the bars that touch skin, and support your partner when they kneel or stand in a spread. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Two steel traps joined by a 28.5 in. steel spreader bar Eight gloss black cast iron crossover clamps with hex set screws Works on ankles or wrists Foam pipe wrap and hex key included Build Out the Device Lock the neck and wrists in the Steel Yoke, add a single Steel Trap or the Steel Neck Trap, or change bar lengths with the Device Bondage Accessory Set. Buy steel bondage pipe by the length and more crossover connectors to build bigger. Compare every set in the device bondage collection or browse all metal bondage gear. Product Specifications Material: Steel pipe; cast iron fittingsFinish: Raw steel with de-burred, polished end cuts; gloss black fittingsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 14.5 lbIncludes: 6 x 7 in. steel pipe, 1 x 28.5 in. steel pipe, 8 x crossover connector, 1 x hex key wrench, 1 x foam pipe wrapNote: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

Read more less

The Steel Trap, scaled up to frame the neck. Four long bars of raw steel turn a collar into a structure. The Steel Neck Trap takes the same square construction as the Steel Trap and builds it from four 14 in. steel pipes, giving a wider frame that sits around the neck like a pillory. Black cast iron crossover clamps hold each corner, and the longer bars leave room to grip, to bolt into a frame, or to carry a pair of wrist traps on either side. It's bondage in steel at its most theatrical, and the centerpiece of the Steel Yoke. How to Use It Close it around the neck as a heavy steel collar your partner can feel every time they move. Add two Steel Traps to the long bars and you have a free-standing pillory for neck and wrists. Mount it on an upright with crossover clamps for a standing position held in steel. PRO TIP: Set the opening so the bars rest around the neck, never against the throat, and never take weight on the neck. Keep scenes short and stay in arm's reach. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Square steel neck trap made from four raw steel 14 in. pipes Four gloss black cast iron crossover clamps with hex set screws Adjustable opening, with long bars for gripping and mounting Foam pipe wrap and hex key included Build Out the Device Add wrist traps and a long bar to make the full Steel Yoke, start smaller with the single-limb Steel Trap, spread the ankles with the Steel Trap Spreader, and reconfigure anything with the Device Bondage Accessory Set. Extra steel bondage pipe and crossover connectors are sold separately. See every set in the device bondage collection or browse all metal bondage gear. Product Specifications Material: Steel pipe; cast iron fittingsFinish: Raw steel with de-burred, polished end cuts; gloss black fittingsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 9.7 lbIncludes: 4 x 14 in. steel pipe, 4 x crossover connector, 1 x hex key wrench, 1 x foam pipe wrapNote: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

Read more less

More steel, more joints, more ways to build. Everything you need to take your devices apart and put them back together as something new. The Device Bondage Accessory Set is the workshop drawer of the Kink Store device bondage system. It adds steel pipe in four lengths, from short 3 in. stubs to a full 35 in. bar, plus crossover clamps and Short T fittings for new junctions. Use it to lengthen a spreader, add tie points to a yoke, or build a device of your own. As Kink.com's Device Bondage puts it, no two setups are ever the same. How to Use It Swap the 35 in. bar into a Steel Trap Spreader for a wider spread. Add the 28.5 in. bar and a pair of crossovers to join two traps at a new angle. Branch the 3 in. stubs off a bar with the Short T fittings for handles or tie-off points for rope and chain. The 14 in. pipe extends a neck trap or makes a new crossbar. PRO TIP: Dry-fit a new build before anyone is in it, tighten every set screw, then give each joint a firm tug. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Five raw steel pipes in four lengths Two crossover connectors and two Short T connectors Fits every set in the 1 in. device bondage system Foam pipe wrap and hex key included Build Out the Device Start with the Steel Trap, the Steel Neck Trap, the Steel Trap Spreader or the full Steel Yoke. Buy single lengths of steel bondage pipe, extra crossover connectors and Short T connectors as your builds grow. Compare every set in the device bondage collection or browse all metal bondage gear. Product Specifications Material: Steel pipe; cast iron fittingsFinish: Raw steel with de-burred, polished end cuts; gloss black fittingsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 13.5 lbIncludes: 2 x 3 in. steel pipe, 1 x 14 in. steel pipe, 1 x 28.5 in. steel pipe, 1 x 35 in. steel pipe, 2 x crossover connector, 2 x Short T connector, 1 x hex key wrench, 1 x foam pipe wrapNote: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

Read more less

The full device: a neck trap and two wrist traps locked onto one long bar of steel. Stocks your partner wears. The Steel Yoke is the most complete set in the Kink Store device bondage system. A 35 in. steel bar carries a Steel Neck Trap at its center and a Steel Trap at each end, every corner held by black cast iron crossover clamps. Once it's locked, head and hands move as one, held in the classic pillory pose without a wall or frame. It's the look of BDSM metal stocks, built from the same pipe and fittings used on Kink.com's Device Bondage sets. How to Use It Lock your partner in for a standing or kneeling display, wrists level with the shoulders and neck framed in steel. Lead them around the room by the bar. Clamp the bar to a frame for a fixed stocks position. Every trap comes apart, so the yoke can also become a spreader, single traps, or something new. PRO TIP: Fit the wrists before the neck, keep the neck opening loose, and never let the yoke's weight hang from the neck. Help your partner kneel and stand, and keep scenes short. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Neck trap and two wrist traps on a 35 in. steel bar Twelve gloss black cast iron crossover clamps with hex set screws Free-standing and portable, no frame required Foam pipe wrap and hex key included Build Out the Device Add the Steel Trap Spreader for the ankles, a single Steel Trap for an extra limb, or the Device Bondage Accessory Set to change lengths and add tie points. Steel bondage pipe and crossover connectors are sold separately. Compare every set in the device bondage collection or browse all metal bondage gear. Product Specifications Material: Steel pipe; cast iron fittingsFinish: Raw steel with de-burred, polished end cuts; gloss black fittingsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 24 lbIncludes: 6 x 7 in. steel pipe, 3 x 14 in. steel pipe, 1 x 35 in. steel pipe, 12 x crossover connector, 1 x hex key wrench, 1 x foam pipe wrapNote: Raw steel has minor defects and imperfections and will develop a patina, or even rust, over time. That is part of the character of device bondage.

Read more less

The raw material of device bondage: raw steel pipe, cut to length and ready to lock into place. Every set in the Kink Store device bondage system starts here. Our steel bondage pipe is cut to five lengths, with every end cut de-burred and polished, and sized to the 1 in. cast iron fittings used across the collection. The steel itself is left raw. Expect minor defects and imperfections, and expect it to develop a patina, or even rust, over time. That is part of the character of device bondage. Buy it to extend a set you already own, replace a bar, or design a device that doesn't exist yet. Choose Your Length 3 in.: stubs, handles and short tie points off a Short T. 7 in.: the bar that forms wrist and ankle traps. 14 in.: neck traps, crossbars and short spans. 28.5 in.: the spreader bar length. 35 in.: the yoke bar, and the longest span for wide spreads and frames. PRO TIP: Plan your build before you order, counting one crossover for every place two pipes meet. Wrap any bar that touches skin with foam pipe wrap. Device bondage takes longer to get out of than cuffs or rope. Keep the hex key within arm's reach, agree on a safeword before the first set screw goes in, and never leave a restrained partner alone. Features Raw steel pipe in 3, 7, 14, 28.5 and 35 in. lengths De-burred, polished end cuts 1 in. nominal Schedule 40, to fit the 1 in. fittings in this collection The same pipe used in every Kink Store device bondage set Sold individually, fittings sold separately Put It to Work Lock pipes together with crossover connectors, branch them with Short T connectors, and finish bars with foam pipe wrap. Or start with a ready-made set: the Steel Trap, Steel Neck Trap, Steel Trap Spreader, Steel Yoke or Accessory Set. Compare them all in the device bondage collection, or browse all metal bondage gear. Product Specifications Material: SteelFinish: Raw steel with de-burred, polished end cutsPipe Size: 1 in. nominal Schedule 40 (1.3 in. outside diameter, 0.13 in. wall)Weight: 3 in. 6.5 oz; 7 in. 15 oz; 14 in. 28.3 oz; 28.5 in. 60 oz; 35 in. 72 ozIncludes: 1 steel pipe in the length selected (fittings sold separately)Note: Minor defects, patina and rust are normal for raw steel.

Read more less